Chapter 3 RFID CONTROL Menu

Label Retry

NOTE: Label Retry only applies when the Error Handling mode is set to Overstrike.

This menu item selects the number of label retries that the RFID encoder will attempt before declaring a fault. This may indicate a problem with the RFID encoder, the antenna assembly, the printer setup, or the label stock. The default is 10.

Max Retry Error

This menu item enables or disables the Max Retry Error menu item. If it is set to Disable, errors are not declared and the print content for the current label is discarded. The default is Enable.

Tag Write Cnt

This menu item displays on the control panel’s LCD the number of tags written since the last Clear Tag Stat operation has been initiated. (See “Clear Tag Stat” below.)

Failed Tag Cnt

This menu item displays on the control panel’s LCD the number of failed tag write attempts since the last Clear Tag Stat operation has been initiated. (See “Clear Tag Stat” below.)

Clear Tag Stat

This menu item clears the Tag Write Cnt and Failed Tag Cnt menu items.

F/W-Version

This menu item displays on the control panel’s LCD the reader firmware version.

52

Page 52
Image 52
Printronix T5000e setup guide Label Retry, Max Retry Error, Tag Write Cnt, Failed Tag Cnt, Clear Tag Stat, Version