Read Tag

 

datafield is ignored, and dynamic data

 

must be entered via the RF command in

 

the EXECUTE mode. The length of the

 

dynamic data must be equal to L.

LOCK;

Optional parameter to write-protect the

 

data. Currently not supported.

ATp;

p specifies the decimal start position

 

where data will be written to the tag.

 

Subsequent bits will be shifted and

 

previous bits are nulled.

(D)Delimiter designating the start and end of static data for the RFWRITE field. Replace (D) with any printable character, except the SFCC and “/” (the slash character).

datafield The static data of the RFWRITE field.

NOTE: RFWRITE fields are not expandable in VDUP and/or

HDUP sections.

Read Tag

Read Tag is not a command, but an element of the ALPHA and BARCODE commands. See “Alphanumerics” and “Bar Codes” in the IGP/PGL Programmer’s Reference Manual for more information.

Purpose Embed RFID data into an ALPHA or BARCODE data field.

Format <RDI>position,length[,format];

<RDI>

The RFID Data Indicator character, as

 

defined by the RFREAD parameter in the

 

ALPHA or BARCODE commands. See

 

the ALPHA and/or BARCODE command

 

description for details.

position

The decimal number that specifies the

 

starting position of the data inside the

 

transponder.

57

Page 57
Image 57
Printronix T5000e setup guide Read Tag