Promise Technology m310p, m210p, VTrak external disk array subsystem Enclosure Settings, Fru Vpd

Chapter 4: Management with WebPAM PROe

Enclosure Settings

The Enclosure–Settings tab enables you to make settings for certain components of the VTrak subsystem enclosure. To make Enclosure settings:

1.Click the Subsystem icon in Tree View.

2.Click on the Enclosures icon.

3.Click on the Enclosure icon.

4.Click on the Settings tab in Management View.

5.Enter a polling interval (15 to 255 seconds) in the Polling Interval field.

6.Enter a value in the Enclosure Warning Temperature Threshold field.

7.Enter a value in the Enclosure Critical Temperature Threshold field.

8.Enter a value in the Controller Warning Temperature Threshold field.

9.Enter a value in the Controller Critical Temperature Threshold field.

10.Click the Submit button.

The changes take effect immediately.

FRU VPD

The Enclosure–FRU VPD tab displays Vital Product Data (VPD) information about Field Replaceable Units (FRU) in the VTrak subsystem enclosure, including:

•Controller Motherboard

•Battery Backup Unit (BBU)

•Cooling Units

•Power Supply Units

•Back Plane

Use this information when communicating with Technical Support and when ordering replacement units. For contact information, see “Contact Technical Support” on page 239.

To access Controller information:

1.Click the Subsystem icon in Tree View.

2.Click on the Enclosures icon.

3.Click on the Enclosure icon.

4.Click on the FRU VPD tab in Management View.

83