Chapter 4: Management with WebPAM PROe
71
• If the service is started, click the Stop button to stop the service.
Or click on the Restart button to restart the service.
CIM Service Settings
To change the CIM service settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click on the CIM Setting link.
4. To enable CIM using a HTTP connection:
• Choose the Yes option
• Enter a port number in the field provided (5988 is the default)
5. To enable CIM using a HTTPS connection:
• Choose the Yes option
• Enter a port number in the field provided (5989 is the default)
6. To enable authentication for your CIM connection(s):
• Choose the Yes option
• Enter the old password in the field provided (password is the default)
• Enter a new password in the field provided
To change your password, the CIM service must be running. See “Manual
Start, Restart, Stop” on page 70.
There is only one user. The default name is cim. No changes are possible.
7. Click on the Submit button.
Netsend
VTrak’s Netsend service sends VTrak subsystem events in the form of text
messages to your Host PC and other networked PCs. In order to use Netsend:
• Netsend must be running on the VTrak
• You must provide the IP address for each recipient PC
• The Messenger service must be running on each recipient PC
Manual Start, Restart, Stop
To manually start, restart or stop the Netsend service:
Note
If your Netsend and Messenger service settings are correct but
the recipient PC does not receive event messages, check the
recipient PC’s Firewall settings. Refer to your OS documentation
for more information.