Promise Technology m210p, m310p manual Network Management, Management Port

Chapter 4: Management with WebPAM PROe

Network Management

Network Management deals with network connections to the VTrak’s Management Port.

Management Port

The Network Management–Ethernet tab enables you to see the current Management Port settings on the Controller, including:

•Controller ID

•Maximum number of ports supported

•Number of ports present

•Number of failed ports

•Port ID

•Port status (enabled or disabled)

•Link status (up or down)

•IP type

•DHCP status (enabled or disabled)

•Primary IP address

•Primary subnet mask

•Default gateway IP address

•Automatic Domain Name Service (DNS) through DHCP (yes or no)

•Primary DNS server IP address

•Primary MAC address

•Maximum speed supported by this connection

To make changes to the Management Port settings:

1.Click the Subsystem icon in Tree View.

2.Click the Administrative Tools icon.

3.Click on the Network Management icon.

4.Click the Port 1 link in Management View.

5.To enable DHCP, check the DHCP box. When DHCP is NOT enabled, enter:

•Primary IP address

•Primary subnet mask

•Default gateway IP address

•Enter a primary DNS server IP address.

6.Click the Submit button.

61