Promise Technology VTrak external disk array subsystem, m210p, m310p manual Installation

Models: m210p VTrak external disk array subsystem m310p

1 262
Download 262 pages 40.73 Kb
Page 17
Image 17

Chapter 2: Installation

Cautions

At least two persons are required to safely lift, place, and attach the VTrak enclosure into a rack system.

Do not lift or move the VTrak enclosure by the handles, power supplies or the controller units. Hold the enclosure itself.

Do not install the VTrak enclosure into a rack without rails to support the enclosure.

To install the VTrak enclosure into a rack with the supplied mounting rails (see Figure 2):

1.Check the fit of the mounting rails in your rack system.

2.Slide the plates out of the mounting rails.

3.Attach one plate to each side of the VTrak enclosure.

Line-up the two studs and six holes in the plate with the corresponding holes in the enclosure. Attach each plate with six screws (included).

4.Slide one of the rails over the plate on one side of the enclosure. The rail is designed to slide freely over the plate.

5.Attach a four-hole flange to the rail, with the flange toward the front (disk drive end) of the enclosure.

Install four rail adjustment screws (included) through the flange into the rail.

6.Attach a two-hole flange to the rail, with the flange toward the back (connector end) of the enclosure.

Install four rail adjustment screws (included) through the flange into the rail.

7.Repeat steps 4 through 6 to attach the other rail and flanges to the enclosure.

8.Place the enclosure with mounting rails into your rack system.

9.Attach the four-hole flanges to the inside of the rack’s front post, using the attaching screws from your rack system.

10.Attach the two-hole flanges to the inside of the rack’s rear post, using the attaching screws from your rack system.

11.Square the rails in the rack.

12.Tighten the adjustment screws and the attaching screws.

9

Page 17
Image 17
Promise Technology VTrak external disk array subsystem, m210p, m310p manual Installation

m210p, VTrak external disk array subsystem, m310p specifications

Promise Technology has established itself as a strong player in the storage solutions market, particularly with its VTrak series of storage systems. Among the notable products in this lineup are the VTrak M310P and M210P models, designed to deliver efficiency, scalability, and high performance for businesses of all sizes.

The Promise VTrak M310P is a high-performance storage solution that emphasizes speed and versatility. This model supports both SAS and SATA drives, enabling enterprises to tailor their storage needs based on workload requirements. It is built with an advanced RAID engine that provides multiple RAID levels, including RAID 0, 1, 5, 6, 10, 50, and 60, ensuring data redundancy and protection against drive failures. The M310P can accommodate up to 96TB of raw storage when fully populated, catering to environments that require large amounts of data retention and quick access times.

Key features of the VTrak M310P include the intuitive management interface, which simplifies storage provisioning and monitoring. This model also incorporates Promise's innovative "HyperRAID" technology, which enhances performance by optimizing I/O operations and providing real-time analytics and reporting. Additionally, the M310P supports a variety of host connection interfaces, including iSCSI, Fibre Channel, and InfiniBand, allowing seamless integration into existing infrastructure.

On the other hand, the VTrak M210P is tailored for a slightly different audience, focusing on small to medium-sized businesses that require reliable and cost-effective storage solutions. The M210P retains several high-end features found in its bigger counterpart while offering a more budget-friendly option. This model also supports a mix of SAS and SATA drives and includes RAID capabilities similar to the M310P for data protection.

The M210P provides a robust set of management tools designed for ease of use, including automated alerts and comprehensive reporting capabilities. Its compact design and reliable performance make it ideal for remote office locations or data centers where space is a premium. Furthermore, the model incorporates advanced power management features to reduce energy consumption without compromising performance.

Both the M310P and M210P are built with scalability in mind, allowing businesses to easily expand their storage capacity as data needs grow. With a focus on durability, performance, and advanced technology, Promise Technology’s VTrak systems are well-positioned to meet the evolving demands of modern data storage. Whether for large enterprises or smaller organizations, these products offer solutions that enhance productivity and ensure data integrity.