Promise Technology m310p, m210p, VTrak external disk array subsystem manual Delete a Disk Array

Models: m210p VTrak external disk array subsystem m310p

1 262
Download 262 pages 40.73 Kb
Page 151
Image 151

Chapter 5: Management with the CLU

7.Highlight RAID Level and press the spacebar to toggle though a list of available RAID levels.

8.If you want to create multiple logical drives, highlight Capacity, press the backspace key to remove the current value, then type a new smaller value.

9.Highlight Stripe and press the spacebar to toggle through stripe sizes 8KB, 16KB, 32KB, 64KB, 128KB, 256KB, 512KB, or 1MB.

10.Highlight Sector and press the spacebar to toggle through sector sizes 512B, 1KB, 2KB, or 4KB.

11.Highlight Write Policy and press the spacebar to toggle write cache policy between WriteBack and WriteThru (write though).

12.Highlight Read Policy and press the spacebar to toggle read cache policy though ReadCache, ReadAhead, and NoCache.

13.Highlight Save Logical Drive and press Enter.

14.Review logical drive(s) you are about to create for your new array. Then do one of the following actions:

If you agree with the logical drive(s) as specified, highlight Complete Disk Array Creation and press Enter. A note will appear to remind you to set up LUN mapping for your new logical drive(s). Press any key to continue.

If you specified less than the full capacity for the logical drive in the previous screen, and you want to add another logical drive now, highlight Create New Logical Drive and press Enter.

If you do not agree with the logical drive(s), highlight Return to Previous Screen and press Enter to begin the process again.

Delete a Disk Array

Caution

When you delete a disk array, you delete all the logical drives and the data they contain. Back up all important data before deleting a disk array.

1.From the Main Menu, highlight Disk Array Management and press Enter.

2.Highlight the disk array you want to delete and press the spacebar to mark it. The mark is an asterisk (*) to the left of the listing.

3.Highlight Delete Marked Arrays and press Enter.

4.Press Y to confirm the deletion.

143

Page 151
Image 151
Promise Technology m310p, m210p, VTrak external disk array subsystem manual Delete a Disk Array

m210p, VTrak external disk array subsystem, m310p specifications

Promise Technology has established itself as a strong player in the storage solutions market, particularly with its VTrak series of storage systems. Among the notable products in this lineup are the VTrak M310P and M210P models, designed to deliver efficiency, scalability, and high performance for businesses of all sizes.

The Promise VTrak M310P is a high-performance storage solution that emphasizes speed and versatility. This model supports both SAS and SATA drives, enabling enterprises to tailor their storage needs based on workload requirements. It is built with an advanced RAID engine that provides multiple RAID levels, including RAID 0, 1, 5, 6, 10, 50, and 60, ensuring data redundancy and protection against drive failures. The M310P can accommodate up to 96TB of raw storage when fully populated, catering to environments that require large amounts of data retention and quick access times.

Key features of the VTrak M310P include the intuitive management interface, which simplifies storage provisioning and monitoring. This model also incorporates Promise's innovative "HyperRAID" technology, which enhances performance by optimizing I/O operations and providing real-time analytics and reporting. Additionally, the M310P supports a variety of host connection interfaces, including iSCSI, Fibre Channel, and InfiniBand, allowing seamless integration into existing infrastructure.

On the other hand, the VTrak M210P is tailored for a slightly different audience, focusing on small to medium-sized businesses that require reliable and cost-effective storage solutions. The M210P retains several high-end features found in its bigger counterpart while offering a more budget-friendly option. This model also supports a mix of SAS and SATA drives and includes RAID capabilities similar to the M310P for data protection.

The M210P provides a robust set of management tools designed for ease of use, including automated alerts and comprehensive reporting capabilities. Its compact design and reliable performance make it ideal for remote office locations or data centers where space is a premium. Furthermore, the model incorporates advanced power management features to reduce energy consumption without compromising performance.

Both the M310P and M210P are built with scalability in mind, allowing businesses to easily expand their storage capacity as data needs grow. With a focus on durability, performance, and advanced technology, Promise Technology’s VTrak systems are well-positioned to meet the evolving demands of modern data storage. Whether for large enterprises or smaller organizations, these products offer solutions that enhance productivity and ensure data integrity.