Chapter 5: WebPAM
57
Controller Settings
Click on the Settings tab to access controller settings.
���Rates – Allocates system resources between the background process (such
as Rebuild, Media Patrol, Expansion/Migration, Initialization and
Synchronization) and the data read/write activity.
A High setting assigns most of the system re sources to background
processes. The process will finished sooner but read/write requests are
handled slower.
A Medium setting tries to balance system resources between the
background processes and data inpu t/output activity.
A Low setting assigns most of the system resources to handling read/write
requests. Read/write requests are handled at nearly normal speed while the
background processes take longer.
•Automatic Rebuild Status – When enabled, a critical or degraded logical
drive will rebuild itself automatically after you replace the failed disk drive.
Automatic Rebuilding applies to RAID 1 logical drives only.
•Buzzer – When enabled, the FastTrak controller’s buzzer will sound to
report a problem.
•S.M.A.R.T. Status – SMART, an acronym for Self-Monitoring Analysis and
Reporting Technology, is a feature of the disk drive software. When enabled,
the FastTrak controller polls the disk drives for SMART information and
reports it to you.
•S.M.A.R.T. Check Polling Interval – The FastTrak controller periodically
polls the physical drives for SMART information and displays it in WebPAM.