TRENDnet TVP- 221H Configuring TVP-221H from a Web Browser, HTTP setting mode, PC Setup, Chapter

TVP-221H User’s4Guide

Chapter 4

Configuring TVP-221H from

a Web Browser

This chapter explains procedures for configuring the TVP-221H from a web browser.

4.1HTTP setting mode

This section describes the processes for setting up the VoIP Gateway once it has been installed. Java enabled browsers including Microsoft Explorer version 4 or higher, or Navigator version 4.5 or higher can be used in this section to view and change parameters.

PC Setup

In order to configure the TVP-221H, the Terminal PC needs to have TCP/IP protocol and a compatible IP Address.

1.Connect the TVP-221H to the network with a RJ-45 UTP cable. Power it on.

2.To configure a PC under Windows 95/98, select the Network Neighborhood icon on the desktop, then select Properties. You will see a screen like below:

3.If a line like the one highlighted ("TCP/IP -> Network Card”) is not listed , select Add-Protocol-Microsoft-TCP/IP-OKto add it.

4.Select Properties for the “TCP / IP -> Network card” entry. You will see a screen like the following:

20