TRENDnet VoIP Gateway, TVP- 221H manual Hunt Group Table, Parameter Description

TVP-221H User’s Guide

From this window, we can Add / Delete / Find or List desired telephone numbers and map them to a hunt group.

Parameter	Description
Telephone	Telephone number to match. This is only part of
Number	the total dialed string.
Hunt Group ID	For each hunt group ID, you need to assign it a
	unique identifier between 0 and 99.
Min. Digits	Minimum number of digits to be collected before
	the ATPM starts matching the dialed string with
	entries in the address table.
Max. Digits	Maximum number of digits to be collected before
	the ATPM starts matching the dialed string with
	entries in the address table.
Strip Length	The number of digits to be stripped at the
	beginning of the collected dial string before
	forwarding the string to the destination.
Append Prefix	(Optional) Digit(s) to be added to the beginning of
	the collected dialed string before forwarding it to
	the destination.

Hunt Group Table

1.From Navigation Bar, Select Dial Plan Settings / Dial Plan Table Setup.

2.The default values are Add and Telephone. Change Telephone to Hunt Group and Click on Select

3.A screen will appear showing the following page:

33