TRENDnet TVP- 221H TVP-221H User’s Guide, atpm aadd 22 2 5 22, atpm dadd 22 dns tvp2.dyndns.org

			TVP-221H User’s Guide
Web Configuration of Dial Plan			atpm req
			atpm aadd 22 2 5 22 2
Dial Plan Settings / Dialplan Table Setup
4.	Select “Add” and “Telephone
5.	Enter following fields
	g.	Telephone Number: 22	atpm hadd 22 2 22
	h.	Hunt Group ID: 22

i.Min. Digits: 2

j.Max. Digits: 5

k.Strip Length: 2

l.Append Prefix: none

6.Click on “OK”

Dial Plan Settings / Dialplan Table Setup		atpm dadd 22 dns tvp2.dyndns.org
7.	Select “Add” and “HuntGroup”
8.	Enter following fields
	m. Hunt Group ID: 22
	n. Destination ID 0: 22
9.	Click on “OK”	atpm done
Dial Plan Settings / Dialplan Table Setup		atpm store

10.Select “Add” and “DestinationID”

11.Enter the following fields

o.Destination ID: 22

p.Hostname (or IP address) tvp2.dyndns.org

q.Click on “OK”

Dial Plan Settings / Store Dial Plan 12. Click on “Yes”

Changes to network settings require rebooting to take effect. Changes to the Dial Plan do not and will take effect as soon as they are stored.

Caution: If you do not store the dial plan, it will be lost when you reboot.

Note: After changing the default IP address, you will be required to use the new IP Address (hostname), in this example, 192.168.0.20 to gain access from the local LAN segment or tvp1.dyndns.org, to gain remote access via the Internet.

TVP-221H configuration (cable connection) on site B

Web Configuration	Telnet / Console
Local (from PC in same Segment)
	Console

68