TRENDnet TVP- 221H atpm aadd 22 2 5 22, Web Configuration of Internet Access, Enter “net reset”

TVP-221H User’s Guide

Web Configuration of Internet Access

Internet Access / PPPoE

1.Select “Yes” to enable PPPoE function

2.Enter username and password provided by your

ISP

3.Click on “Save”

Internet Access / Dynamic DNS

4.Select Enable

5.Enter Server Name, Host Name, User Name, Password (eg. dyndns.org tvp1 username1 password1)

6.Click on “Save”

7.Click on “Store”

Once Internet Access is setup, you could choose to reboot and then reconnect using an PC with internet access:

1.Click on “Reboot”

On your PC, close all browser windows, before reopening.

2.Enter tvp1.dyndns.org

3.You will be prompted for Username and Password. Default Username and Password are “admin” and “123” respectively.

You would then continue as below:

Web Configuration of Dial Plan

Dial Plan Settings / Dial plan Table

Setup

8.Select “Add” and “Telephone”

9.Enter following fields

a.Telephone Number :22

b.Hunt Group ID: 22

c.Min. Digits: 2

d.Max. Digits: 5

e.Strip Length: 2

f.Append Prefix: none

10.Click on “OK”

Enter “telnet 192.168.0.1”

Enter Username “admin”

Enter “123”

net set pppoe on

net set pppoe user_name [user_name] net set pppoe pw [my_password]

net set dyndns on

set dyndns add [serv_name]

[host_name] [user_name] [password] (eg. dyndns.org tvp1 username1 password1)

config activate config store

From the local connection, you could continue setting up the dial plan. However you could choose to reboot.

Enter “net reset”

Using a RJ45 Cat 5 cable, connect your TVP-221H directly to your ADSL / Cable Modem and initiate new Telnet session from a PC with internet Access:

Enter “telnet tvp1.dyndns.org” Enter Username “admin” Enter “123”

You would then continue as below:

atpm req

atpm aadd 22 2 5 22 2

atpm hadd 22 2 22

58