TRENDnet TVP- 221H Site B TVP Gateway Configuration - FXS to FXO PLAR, or from, 192.168.0.20

TVP-221H User’s Guide

Site B TVP Gateway Configuration - FXS to FXO PLAR

Web Configuration				Telnet / Console
Login to Site A TVP Gateway				From Console
1. Logon to the Web Configuration by opening				Enter Username “admin”
	your browser			Enter Password “123”
2.	Enter 192.168.0.55
3.	You will be prompted for Username and			or from
	Password. Default Username and Password
	are “admin” and “123” respectively.			Windows command prompt
				Enter “telnet 192.168.0.55”
				Enter Username “admin”
Web Configuration of Dial Plan				Enter Password “123”
Dial Plan Settings / Dial Plan Table Setup				atpm req
4.	Select “Add” and “Telephone			atpm aadd 11 5 5 11 2
5.	Enter following fields
	a.	Telephone Number :11		Lines 4-13 creates a zone
	b. Hunt Group ID: 11
				number (a number that tells
	c.	Min. Digits:	5
	d.	Max. Digits:	5	GW B to forward to a remote
	e.	Strip Length:	2	destination) for TVP GW A.

f.Append Prefix: none

6.Click on OK

Dial Plan Settings / Dial Plan Table Setup			atpm hadd 11 2 11
7.	Select “Add” and “HuntGroup”
8.	Enter following fields
	a. Hunt Group ID: 11
	b.	Destination ID: 11
9.	Click on OK
Dial Plan Settings / Dial Plan Table Setup			atpm dadd 11 h323
10.	Select “Add” and “DestinationID”
11.	Enter the following fields		192.168.0.20
	a.	Destination ID: 11	atpm done
	b. Hostname (or IP address)		atpm store
		192.168.0.20
	c.	Click on OK	set tcid 0 dial_in plar 11201
Dial Plan Settings / Dial in PLAR/CID			config activate
12.	Enter 11201 in the PLAR Address Field
			config store
13.	Click on OK
Dial Plan Settings / Store Dial Plan
14.	Click on Yes

	Lines 12-14 setup the hotline
	(PLAR) from TVP Gateway
Case 8: PLAR (Hotline) FXO to FXO example	B to TVP Gateway A

74