TRENDnet TVP- 221H manual Site A TVP Gateway configuration - FXO to FXS PLAR, atpm aadd 22 5 5 22

TVP-221H User’s Guide

Site A TVP Gateway configuration - FXO to FXS PLAR

Web Configuration			Telnet / Console
Login in to Site A TVP Gateway			From Console
Logon to the Web Configuration by opening			Enter Username “admin”
your browser			Enter Password “123”
1. Enter Wan IP xxx.xxx.xxx
Or if you are on the LAN,			or
192.168.0.20
2. You will be prompted for Username			Windows command prompt
and Password. Default Username and
Password are “admin” and “123”			Enter “telnet xxx.xxx.xxx.xxx”
respectively.			Enter Username “admin”
			Enter Password “123”
Web Configuration of Dial Plan			atpm req
Dial Plan Settings / Dial Plan Table Setup			atpm aadd 22 5 5 22 2
3. Select “Add” and “Telephone
4. Enter following fields
a.	Telephone Number: 22		Lines 3-10 creates a zone
b.	Hunt Group ID: 22
			number (a number that tells the
c.	Min. Digits:	5
			ATPM to forward to a remote
d.	Max. Digits:	5
			destination) address entry in
e.	Strip Length: 2
f.	Append Prefix: none		TVP GW A for TVP GW B

5.Click on OK

Dial Plan Settings / Dial Plan Table Setup			atpm hadd 22 2 22
6.	Select “Add” and “HuntGroup”
7.	Enter following fields
	a. Hunt Group ID: 22
	b. Destination ID 0: 22
8.	Click on OK		atpm dadd 22 h323 192.168.0.55
Dial Plan Settings / Dial Plan Table Setup
9.	Select “Add” and “DestinationID”		atpm done
10.	Enter the following fields		atpm store
	a.	Destination ID: 22
	b. Hostname (or IP address)
		192.168.0.55
	c.	Click on OK
Dial Plan Settings / Dial in PLAR/CID			set tcid 0 dial_in plar 22203
11.	Enter 22203 into the PLAR Address
			config activate
	Field
			config store
12.	Click on OK
Dial Plan Settings / Store Dial Plan
13.	Click on Yes

Lines 11-13 Setup the hotline (PLAR) from TVP Gateway A to TVP Gateway

B

72