TRENDnet TVP- 221H, VoIP Gateway manual

TVP-221H User’s Guide

iii.Manual: Enables gatekeeper co-operation in manual operation (the gatekeeper address must be properly assigned).

The following fields must be filled in when Gate Keeper Mode is set to manual.

2.Gate Keeper Address: Specify the gatekeeper address when configured to manual mode. When auto mode is desired, this field should be set to auto

3.Allow Calls Without Gate Keeper: This field is to inform the H.323 stack to allow calls when the endpoint is not registered with a gatekeeper.

4.Registration Type: This field is to set the endpoint registration type. This specifies how the endpoint will register itself with the gatekeeper.

5.Max Registration Retries: This field is to control how many registration attempts will be made before the endpoint considers itself to have failed registration.

6.Time To Live: Do not have to set this because GK to perform this function. Every x seconds will check to see if it is alive

7.Endpoint Prefix: This command is used to set the H.323 prefix that the TVP-221H uses when registering to an H.323 gatekeeper.

8.Terminal ID: To specify GW’s ID.

9.GateKeeper ID: To specify Gate Keeper’s ID.

You'll have to reboot the system to make your changes take effect!

30