TRENDnet VoIP Gateway Local from PC in same Segment, Console, However you could choose to reboot

TVP-221H User’s Guide

TVP-221H configuration (ADSL PPPoE connection) on site A

Web Configuration			Telnet / Console
Local (from PC in same Segment)
			Console
Open your browser			Connect RS-232 to TVP-221H & PC
	1.	Enter 192.168.0.1	Open Hyper Terminal
	2. You will be prompted for		Input parameters:
		Username and Password. Default	Baud rate	19,200
		Username and Password are	Number of data bit	8
		“admin” and “123” respectively.	Parity check	None
Web Configuration of Internet Access			Number of stop bit	1
			Flow control	None
Internet Access / Fixed IP			Enter “123”
		Enter Fixed IP (192.168.0.20,
		Subnet Mask(255.255.255.0),
			Telnet (from PC in same Segment)
		Default Gateway 192.168.0.254.
			From Windows command prompt
	3.	Click on ‘Save”
			Enter “telnet 192.168.0.1”
			Enter Username “admin”
Once Internet Access is setup, you could			Enter “123”
choose to reboot the TVP-221H, and then
use a PC in the same segment and with a			net set ip 192.168.0.20
web browser, access theTVP-221H:			net set mask 255.255.255.0
If using the Router’s DHCP Server, make			net set gateway 192.168.0.254
sure the routers DHCP Server is on and that
the configuring PC and TVP-221H are			From the local connection, you could
DHCP Client enabled.			continue on setting up the dial plan.
If you would like your PC and / or TVP-221H			However you could choose to reboot,
to have a Fixed IP, Make sure that the their			Enter “net reset”
IP’s do not conflict with the range of IP’s
allocated with the Routers DHCP Server.			Connect your TVP-221H and a PC
If you are trying to access the TVP-221H			directly to your router making sure
from a PC in the same segment as the TVP-			they are in the same LAN segment.
221H (LAN), Open your browser and enter			From the windows command prompt:
1.	Enter 192.168.0.20		Enter “telnet 192.168.0.20”
If you would like to access the TVP-221H			Or from a remote computer
from the WAN side, from a remote PC with
Internet Access:			Enter “telnet tvp1.dyndns.org”
2.	Enter tvp1.dyndns.org		Enter Username “admin”
You will be prompted for Username and			Enter “123”
Password. Default Username and Password			You would then continue as below:
are “admin” and “123” respectively.

You could then continue as below:

67