TRENDnet VoIP Gateway, TVP- 221H manual Appendix C - Connecting Through Telnet, telnet

TVP-221H User’s Guide

Appendix C – Connecting Through Telnet

To use Telnet, Internet Access must have been previously setup so that the gateway is visible on the internet (See User Guide for More Information). Alternatively, you can use Telnet to locally access the TVP-221H, if you are under a router or switch and the TVP-221H and your computer are in the same network segment.

To access the TVP-221H Gateway from a remote location / or from the same LAN Segment using Telnet, perform the following tasks:

Task

Open the windows command prompt and enter the telnet command followed by the IP address of the TVP-221H Gateway you want to access.

When the TVP-221H Gateway prompts you to Login, enter the user name "admin”

When the TVP-221H Gateway prompts you for the Password, enter the password. The default password is "123" but it is recommended that the password be changed for security considerations. The password can be changed from the Web UI Administration / Password submenu page.

Type in “ping xxx.xxx.xxx”, where xxx.xxx.xxx is your ISP provided DNS Server IP or any known Public Internet Address. The following dialogue confirms Internet Access

Console>ping 168.95.1.1

ping <168.95.1.1>: 56 data bytes 168.95.1.1 is alive

If the ping times out, you do not have Internet Access or the Public IP Address you pinged is incorrect. Try another IP Address. If you confirm that you do not have Internet Access, please refer to the trouble shooting section of the User Manual or consult your ISP to make sure your Internet Access Data is correct and accurately entered into the TVP-221H.

Prompt

None

Login:

Password

:

Console>

Type

telnet xxx.xxx.xxx

admin

123

ping xxx.xxx.xxx

87