TRENDnet VoIP Gateway, TVP- 221H manual Local Telnet from PC in same Segment

Models: VoIP Gateway TVP- 221H

1 100
Download 100 pages 3.5 Kb
Page 69
Image 69
Local Telnet (from PC in same Segment)

TVP-221H User’s Guide

Open your browser

Enter 192.168.01

1.You will be prompted for Username and Password. Default Username and Password are “admin” and “123” respectively.

Web Configuration of Internet Access

Internet Access / Fixed IP

Enter Fixed IP (192.168.0.55, Subnet Mask(255.255.255.0), Default Gateway 192.168.0.254

2. Click on “Save”

Once Internet Access is setup, you could choose to reboot the TVP-221H, and then use a PC in the same segment with a web browser, to access theTVP-221H:

If using the Router’s DHCP Server, make sure the routers DHCP Server is on and that the configuring PC and TVP-221H are DHCP Client enabled.

If you would like your PC and / or TVP- 221H to have a Fixed IP, Make sure that the their IP’s do not conflict with the range of IP’s allocated with the Routers DHCP Server.

If you are trying to access the TVP-221H from a PC in the same segment as the TVP-221H (LAN), Open your browser and enter

3. Enter 192.168.0.55

If you would like to access the TVP-221H from the WAN side, from a remote PC with Internet Access:

4. Enter tvp2.dyndns.org

You will be prompted for Username and Password. Default Username and Password are “admin” and “123” respectively.

You could then continue as below:

Connect RS-232 to TVP-224HR

and PC

 

Open Hyper Terminal

 

Input parameters:

 

Baud rate

19,200

Number of data bit

8

Parity check

None

Number of stop bit

1

Flow control

None

Enter “123”

Local Telnet (from PC in same Segment)

From Windows command prompt Enter “telnet 192.168.0.1” Enter Username “admin” Enter “123”

net set ip 192.168.0.55

net set mask 255.255.255.0 net set gateway 192.168.0.254

From the local connection, you could continue on setting up the dial plan. However you could choose to reboot,

Enter “net reset”

connect your TVP-221H and a PC directly to your router making sure they are in the same LAN segment.

From the windows command prompt:

Enter “telnet 192.168.0.55”

Or from a remote computer

Enter “telnet tvp2.dyndns.org” Enter Username “admin” Enter “123”

You would then continue as below:

69

Page 69
Image 69
TRENDnet VoIP Gateway, TVP- 221H manual Local Telnet from PC in same Segment, net set mask 255.255.255.0 net set gateway