FastTrak TX2200, TX2300 User Manual
118
Step 3: Install the BIOS Package
1. Boot your PC from the DOS-bootable diskette.
2. When the A:\> prompt appears, remove the DOS-bootable diskette and
insert the FastTrak Upgrade diskette.
3. Find your model of FastTrak controller and type corresponding line at the
A:\> prompt:
• TX2200, type pflash /f 571.bin and press Enter
• TX2300, type pflash /f 771.bin and press Enter
4. When the A:\> prompt appears, remove the upgrade diskette and insert the
DOS-bootable diskette.
5. Reboot your PC from the DOS-bootable diskette.
6. When the A:\> prompt appears, remove the DOS-bootable diskette and
insert the FastTrak Upgrade diskette.
7. Find your model of FastTrak controller and type corresponding line at the
A:\> prompt:
• TX2200, type pflash /f 571.bin and press Enter
• TX2300, type pflash /f 771.bin and press Enter
8. When the A:\> prompt appears, remove the FastTrak Upgrade diskette.
9. Reboot your PC normally.
This completes BIOS upgrade procedure.
Cautions
• Before you begin, backup any important or useful data.
• Do NOT skip any steps in the procedure.
• Do NOT power off your PC during the procedure.
Note
For systems with multiple FastTrak TX Series con trollers:
With the new BIOS installed, only the FastTrak in the lowest
numbered PCI slot will appear in the BIOS screen. However, all
properly installed FastTraks will appear in WebPAM.