Proxima ASA PL-300E, BNDL-001 manual To remotely power the projector

To remotely power the projector:

1.Plug in the power cord and turn on the projector’s main power switch.

2.Press the power button in the upper right corner of the transmitter to power the projector.

Powering the projector from the transmitter

The LED blinks orange while the projector’s lamp warms up. When this LED changes to solid green, the projector is ready to present.

All Proxima projectors use a warm-up/cool-down period to ensure the life of the lamp. The transmitter’s LED changes from green to orange when the power switch on the transmit- ter is turned off. It continues to blink orange as the projector completes its warm-up/cool-down procedure.

30 ProjectionLink User & Installation Guide