Proxima ASA BNDL-001 RS-232 Control Cables, Projector Cables required Part Provided with Number

RS-232 Control Cables

Additional parts are also included for mounting. These parts are the:

•Table Mounting Bracket (140-01610)

•Rack Mounting Bracket (140-01611)

•Hardware Mounting Kit (505-1043-00) that contains:

•eight 8 mm screws

•four #10-32 screws

RS-232 Control Cables

All cables required for various configurations are included with ProjectionLink. However, you will only need a few of these cables to make your actual connections. The following table lists which cables are needed for RS-232 control:

Projector	Cable(s) required	Part	Provided with
		Number
		(P/N)
X350	N/A		N/A
S520	HD15 to DB9 (15-pin to 9-pin)	900-95212	ProjectionLink
LX2, LS2	MiniDin8 to DB9 (8-pin to 9-pin)	900-95190	Projector
DP6150	9-pin to MiniDin	301.113	ProjectionLink
	MiniDin8 to MiniDin8 (8-pin to 8-pin)	301.102	Projector
DP6850, DP6850+	HD15 to DB9 (15-pin to 9-pin)	900-95212	ProjectionLink
DP9240, DP9260,	MiniDin8 to DB9 (8-pin to 9-pin)	900-95190	Projector
DP9260+
Pro AV 9320,	DB9 to DB9 RS-232 cable (9-pin to	900-95209	ProjectionLink
Pro AV 9350	9-pin)
DP9280	MiniDin8 to DB9 (8-pin to 9-pin)	900-95190	Projector
Pro AV 9400,	DB9 to DB9 RS-232 cable (9-pin to	900-95209	ProjectionLink
Pro AV 9400+,	9-pin)
Pro AV 9410

8 ProjectionLink User & Installation Guide