PSC 7000 manual Length Control, Set Length 2 to the maximum length by following the RSS

2 Programming Instructions

RSS Expanded Length 1, Length

Expanded Length 1, Length 2 Programming Instructions

Symbologies

RSS Expanded — continued

Length Control

Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.

Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code if the label length falls in the range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1.Scan the START bar code.

2.Scan the Fixed Length Decoding bar code.

3.Scan the END bar code.

4.Set Length 1 to the first fixed length by following the RSS

below.

5. Set Length 2 to the second fixed length (or to ‘00’ if there is only one fixed length) by following the

below.

Configuring Variable Length Decoding:

1.Scan the START bar code.

2.Scan the Variable Length Decoding bar code.

3.Scan the END bar code.

4.Set Length 1 to the minimum length by following the RSS

Expanded Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the maximum length by following the RSS

Expanded Length 1, Length 2 Programming Instructions below.

5-26 PowerScan® 7000 Linear Imager