Wand Emulation, Supported Symbologies | PSC 7000 instruction

Interface Features

Wand Emulation

Supported Symbologies

The Wand Emulation interface will transmit bar code data as a wand device would. This interface will transmit the following bar code sym- bologies:

•UPC/EAN

•UPC/EAN with addons

•Code 39

•Full ASCII Code 39

•Interleaved 2 of 5

•Codabar

•Code 128

Pharmacode 39 is transmitted as Code 39, all other bar code symbology types read by the scanner will be transmitted as Code 128.

Wand Emulation Bar Code Format

The following format settings are required for the wand emulation inter- face. These settings have been pre-configured at the factory for Wand Emulation scanners.

•UPC-A bar codes must include all 12 digits.

•UPC-E bar codes must contain 8 digits, including a system digit, 6 data digits, and the check digit.

•EAN-13 bar codes must have all 13 digits.

•EAN-8 bar codes must include all 8 digits.

•Code 39, Code 39 Full ASCII, and Pharmacode 39 bar codes must NOT contain start / stop characters.

•Codabar bar codes must include the start / stop characters, pre- sented in the ABCD format.

•Interleaved 2 of 5 bar codes must have an even number of digits.

Product Reference Guide

3-33

Image 61

PSC 7000 manual Supported Symbologies, Wand Emulation Bar Code Format

Contents

Product Reference Guide PowerScan 7000 Linear Imager Disclaimer PSC Inc Table of Contents PowerScan Iii IBM USB About This Manual Getting Started Manual Conventions Connecting the Scanner USB Connection Programming Resetting the Standard Product Defaults Second Double Read Timeout General Features Disable Powerdown Timeout Start Duration Power On Alert LED and Beeper IndicatorsEnable After decode Good Read When to Indicate Good Read Beep Control Medium High Good Read Beep Frequency 80msec Good Read Beep Length 200msec Good Read Beep Volume Scan Mode Scanning Features Single Seconds Active Scanning Time Minutes Laser Pointer Control Seconds Seconds Interface Related Features Interfaces Supported Pings for more information about keyboards PCs Supported RS-232 Standard Interface Selection Interface Selection Keyboard Wedge H Wedge J Wedge K Wedge L Wedge M Wedge N Keyboard Wedge O Wedge P Wedge Q Wedge R Wedge S Wedge T Interface Features Obey Host Commands Ignore Host Global Interface FeaturesHost Transmission Buffers = Baud RS-232 Interface Features RS-232 Interface Features Parity = None Data Bits Stop Bit Parity = Even Parity = Odd Hardware Flow Control Intercharacter DelaySoftware Flow Control Inter-Char Delay = No Disable Hardware Control RS-232 Interface Features Disable Software Flow Control Host Echo Signal Voltage Normal/TTLHost Echo Quiet Interval RS-232 Invert Host Echo Quiet Interval = 10msec Disable Host Echo Enable Host RS-232 Interface Features Disable RS-232 Invert Signal Voltage Normal RS-232Beep on Ascii BEL Beep on Not on File ACK NAK Options Enable Beep On Not On File ACK NAK Options Disable ACK Ters or any decimal value from 000 to 255. Pad ACK Character NAK Character Enable Retry On ACK NAK Timeout Retry on ACK NAK Timeout = Infinite timeout ACK NAK Timeout Value 255 = Retry forever ACK NAK Retry Count Ignore Errors Detected RS-232 Interface Features ACK NAK Error Handling Transmission Failure Indication Enable Transmission Error Indication Configure as Handheld Scanner IBM-USB Interface FeaturesIBM-USB Device usage IBM Transmit Labels in Code 39 Format Disable Convert to Code Wand Emulation Supported SymbologiesWand Emulation Bar Code Format Wand Idle State Bar/Space PolarityBar/Space = High/Low Wand Idle State = Low Signal Speed Transmit Leading Noise Enable Trailing Noise Enable Leading Noise No Symbology Conversion Symbology Conversion Symbology Conversion Keyboard Wedge/USB Keyboard France Germany Italy Norway Portugal Spain Sweden Switzerland Japan 106 Key Hungary Czech Slovakia Romania Croatia Poland Specifies which format the scanner sends character data Disable Caps Lock This feature does not apply to the USB Keyboard interface Disable Control Characters Disable Keyboard Simulation Gramming Mode, then the Set Wedge Quiet Interval 0A 100 msec Intercharacter Delay Data Editing Overview Data Editing Please Keep In Mind Global Prefix/Suffix Scan the END bar code to exit Programming Mode Set Suffix AIM ID AIM ID Disable AIM ID Label ID Position Options Label ID Characters Default Setting for this Feature a 41 hex Default Setting for this Feature a 41 hexLabel ID Label ID Position Before Bar Code Data Default Setting for this Feature FF FF 4646 hex Label ID G2 4732 hex Default Setting for this Feature G 47 hexG5 4735 hex G8 4738 hex 2A hex 5258 hex Std 2 @ 40 hex Case Conversion Character Conversion Conversion Symbologies Check Digit Transmission Disable/Enable UPC-AExpand UPC-A to EAN-13 System Number Transmission UPC-A Enable UPC-ASend Check Digit Don’t Expand To EAN-13 Expand to Disable Sys Tem Number Transmission Enable System Mission Minimum = Read UPC-A Minimum Reads In-store Minimum Reads 10 to 300 mSec in 10 mSec increments and is 07 70 milliseconds System Number Disable/Enable UPC-EExpand to UPC-E to UPC-A Expand UPC-E to EAN13 UPC-E Enable UPC-ESend Check Digit Don’t Expand UPC-E to EAN-13 Don’t Expand UPC-E to Minimum = Reads Minimum Reads Disable Gtin Disable/Enable Gtin EAN-13 Disable/Enable EAN-13EAN-13 Flag 1 Character Transmit EAN-13 Flag Char Enable EAN-13 Don’t Send Check Digit Disable Isbn Minimum Reads Enable EAN-8 Disable/Enable EAN-8 Don’t Expand To EAN-13 EAN-8 Minimum Reads Add-ons Disable Optional Code Add-ons Disable Optional Digit Add-ons RSS-14 Disable/Enable RSS-14UCC/EAN 128 Emulation Emulation Disable RSS-14 Minimum Reads Disable RSS Expanded Disable/Enable RSS ExpandedRSS Expanded Set Length 2 to the maximum length by following the RSS Length Control Variable Length Decoding RSS Expanded Length 1, Length 2 Pro- gramming Instructions Minimum Reads Code Enable Code Disable Check Char Calculation Don’t Transmit Start/Stop Characters Disable Code 39 Full Length Control Variable Length Decoding Code 39 Length 1, Length 2 Programming Instructions Don’t require Quiet Zones Quiet Zones Code 39 Stitching Disable Code Stitching Enable Minimum Reads Disable Pharmacode Disable/Enable PharmacodePharmacode Don’t Trans Mit Start/Stop Characters Enable Check Char Transmission Enable Code Transmit Function Characters Length Control Variable Length Decoding Code 128 Length 1, Length 2 Programming Instructions Code 128 Stitching Disable Code Stitching Minimum Reads Interleaved 2 Disable/Enable Interleaved 2Check Digit Calculation Check Digit Transmit Disable Check Digit Calculation Disable InterleavedEnable Check Digit Transmission Length Control Variable Length Decoding Start Setting Interleaved 2 of 5 Stitching Disable Interleaved Stitching Minimum Reads Codabar Disable/Enable CodabarCheck Character Verification Disable Check Char Verification Disable Codabar Length Control Variable Length Decoding Codabar Length 1, Length 2 Programming Instructions Quiet Zones Start/Stop Character Transmission Start/Stop Character TypeStart/Stop Character Match Start/Stop Type abcd Abcd Enable Start/Stop Char Transmission Disable Start/Stop Char Match Codabar Stitching Disable Codabar Stitching Minimum Reads Following options apply to the Code 93 symbology Length Control Variable Length Decoding Code 93 Length 1, Length 2 Programming Instructions Code 93 Stitching Minimum Reads MSI/Plessey Disable/Enable MSI/PlesseyCheck Digit Verification Disable Check Digit Verification Disable MSI/PlesseyDigit Disable Check Digit Transmission Length Control Variable Length Decoding MSI/Plessey Length 1, Length 2 Program- ming Instructions MSI/Plessey Stitching Disable MSI/Plessey Stitching Minimum Reads Standard 2 Disable/Enable Standard 2 Disable Std 2 Length Control Variable Length Decoding Setting Standard 2 of 5 Stitching Disable Std 2 Stitching Minimum Reads Start State Barcode Length Control Variable Length Decoding Decimal Minimum Reads Symbologies Parameter Optical and Read Performance Parameters Physical Properties Parameter SpecificationElectrical Parameters Other Parameters Environmental Parameters PowerScan 7000 Linear Imager RS-232 Standard Cable Pinouts Primary Interface CablesIBM Port 5B/9B/17 USB & USB Keyboard IBM USB Keyboard Wedge Cable Pinouts Alpha-Numeric Pad Alpha-Numeric Pad Read Checksum Label Code Type Defaults by Symbology Parameter Default Setting Interface Default ExceptionsIBM Interfaces RS-232 Wincor/Nixdorf Keyboards Keyboard Model Cross Reference Keyboard Function Key Mappings Model Type Trans Func Use Key Scancode Hex Table E-2. Scanset 1 Function Key Map Table E-3. Scanset 2 Function Key Map Key Scancode Table E-4.Scanset 3, 102-Key Function Key Map Table E-5. Scanset 3 122-Key Function Key Map Ascii code Key Scancode Table E-6. Japanese DOS Function Key Map Table E-7. NEC 9801-Key Function Key Map Accepting RS-232 Commands Host Commands PowerScan 7000 Linear Imager Sample Symbols Sample Symbols Ascii Chart PSC Inc