PSC 7000 manual ACK NAK Timeout Value, = Infinite timeout

Interface Features

RS-232 Interface Features — cont.

ACK NAK Timeout Value

START
MODE		BARCODE
	This item specifies the time the scanner will wait for
	an ACK character from the host following a label
	transmission.
	0 = Infinite timeout
	1 - 75 = Timeout in 200-millisecond increments
	To configure this feature, scan the “START” bar code
	above to place the unit in Programming Mode, then
	the “Set ACK NAK Timeout Value,” followed by the
	digits from the Alphanumeric table in Appendix C,
	Alpha-Numeric Pad representing your desired
	value. Exit programming mode by scanning the
	“END” barcode below
	DEFAULT SETTING FOR THIS FEATURE: 01
Set ACK
NAK Timeout
Value
END

Product Reference Guide 3-27