PSC 7000 manual 07 70 milliseconds, 10 to 300 mSec in 10 mSec increments and is

UPC-A

UPC-A — continued

START
STATE		BARCODE
	This item is used to set the timer value when optional
	add-ons are enabled. The selectable range is from
	10 to 300 mSec in 10 mSec increments and is
	entered in hex (01-0x1E by 01). To configure this fea-
	ture, scan the “START” bar code above to place the
	unit in Programming Mode, then the “Add-On Timer,”
	followed by the hex digits from the Alphanumeric
	table in Appendix C, Alpha-Numeric Pad repre-
	senting the disired timer setting. Exit programming
	mode by scanning the “END” bar code below.

Add-On Timer

DEFAULT SETTING FOR THIS FEATURE:

07 (70 milliseconds)

END

Product Reference Guide 5-7