PSC 7000 manual ACK Character, Ters or any decimal value from 000 to 255. Pad

Interface Related Features

RS-232 Interface Features — cont.

ACK Character

START
MODE		BARCODE
	Sets the ACK character from the set of ASCII charac-
	ters or any decimal value from 000 to 255. Pad
	entries of less than three digits with zeros, as in
	“005”. To configure this feature, scan the “START” bar
	code above to place the unit in Programming Mode,
	then the “Set ACK Character,” followed by the digits
	from the Alphanumeric table in Appendix C, Alpha-
	Numeric Pad representing your desired character.
	Exit programming mode by scanning the “END” bar-
	code below.
	DEFAULT SETTING FOR THIS FEATURE: 006
Set ACK
Character
END

3-24 PowerScan® 7000 Linear Imager