Using the PT2000 and Top Gun with PALPRO
22 PT2000 & Top Gun PDTs
2. Attach the other end to the 25-pin connector of the keyboard
wedge cable (refer to Figure 3-6 on page 21).
3. PC: Attach the small male plug of the PSC cable to the keyboard
jack on the PC (refer to Figure 3-6).
Ter m i n al : Insert the keyboard cable plug into the modular jack
on the PSC cable connector.
4. PC: Attach the keyboard cable to the small female jack on the
PSC cable (refer to Figure 3-6).
Ter m i n al : Insert the modular plug of the PSC cable into the
keyboard input jack on the terminal.
5. Scan the appropriate bar code below:

Using the

Keyboar d

Wedg e
To use the PT2000 or Top Gun as a keyboard wedge, complete the
setup and installation procedures described earlie r in this chapter. Then
complete the following steps:
1. From the PALPRO Options menu, select <F3>.
Figure 3-7: The PALPRO Options Menu
2. Open the application and place the cursor at the location where
the data is to be entered.
AT or PS /2 m ode ls
30-286, 50, 50Z, 60,
70, 80, 90, 95 (U.S.
keyboard)
*$+$-D2C011EE*
IB M 3151 t er min al *$+$-D2C015EE*

PALPRO OPTIONS

F3=WEDGE

F2=SELECT PROG

F4=PASSWORDยค