Collecting Data
User’s Guide 23
3. Use a bar code scanner (the Top Gun module or another device
attached to the PT2000), a magnetic stripe reader, or the keypad
to enter data.
zWhen scanning a bar code or running a magnetic stripe card
through the reader, the data is entered at the cursor position
in the application.
zWhen using the keypad to enter the data, the data is
displayed in the second line of the PT2000 display screen.
zPress the <ENTER> key, to send the data to the PC.
4. When finished collecting data, press the <F5> key
(<Alpha>+<F1>) to exit.
Figure 3-8: The PT2000 Wedge Menu
Using PALPRO
PALPRO combines three Portable Applications Library applications into
a single, convenient program (refer to page 8). With PALPRO installed
on the PSC portable, it is possible to switch from one application to
another without having to install each application.

Selecting a

PALP RO

Application

Complete the following steps to select a PALPRO application:
1. With the PALPRO Options menu displayed, press the <F2> key.
Figure 3-9: The PALPRO Options Menu

* PT2000 WEDGE *

¤

F5=EXIT

PALPRO OPTIONS

F3=WEDGE

F2=SELECT PROG

F4=PASSWORD¤