Programming Parameters
86 PT2000 & Top Gun
Overview
This appendix provides information about all programmable settings for
the PT2000 and Top Gun.
zTable A-1: lists programming ID numbers for predefined defaults
(refer to page 87).
zTable A-2: lists save-and-exit settings (refer to page87).
zTable A-3: provides the following information (refer to page88):
Code Parameter : is the human name for programming options.
ID # : is the portable name for programming options. For example, to
set a Code 39 minimum label length, enter 01 when programming the
portable. Programming ID numbers given in this appendix can be used
with all programming methods.
Type : tells what kind of setting to use for each code parameter:
On/Off : is a toggle. 1 turns the parameter on, and 0 turns it off.
Value : requires a two-character entry (e.g., 02 for two beeps after each
good read, or 05 for a length of five).
String : uses one or more ASCII characters, followed by // to indicate
the end of the string.
Immediate : takes effect as soon as the ID number is entered.
Acceptable Input : gives the settings or range of settings that you can
use for each code parameter.
Note: For information about programming, refer to Chapter4.
Note: For explanations of s ome general program ming parameters,
refer to page 66. For explanations of serial parameters, refer
to page 68.