PSC TopGun, PT2000 manual Downloading a File, Changing Settings

Transferring Data With PSC Utilities

Downloading a File

To send a file from the PC to the PT2000 or TopGun:

1.Prepare the portable to receive a file.

Note: Refer to the information about the DESCRIPT application on Page 35.

2.Then select File > Send from the PTFER menu.

3.Specify the name and location of the file in the File to Transmit dialog box. (Except for the title bar, the File to Transmit dialog

box is identical to the File to Receive dialog box, shown in

Figure 5-4.)

4.When the file has been successfully transferred, a message appears in the PTFER window.

Changing Settings

By default, PTFER uses the PC’s COM2 port for communicating with the portable.

If the COM2 port is already in use by a modem, mouse, or other device, specify a different port or alter the communications settings for the port.

Note: When not sure what settings to use, leave them at the defaults. To restore factory defaults, scan the bar codes in

Predefined Defaults on page 128

To use a different port or to alter port settings:

1.Select Options > Settings from the PTFER menu to receive the

Communications Settings dialog box (Figure 5-4).

76 PT2000™ & TopGun™