PSC TopGun, PT2000 manual Note For information about programming, refer to Chapter, Overview

Programming Parameters

Overview

Note: For information about programming, refer to Chapter 4.

This appendix provides information about all programmable settings for the PT2000 and TopGun.

Table A-1: lists programming ID numbers for predefined defaults (refer to page 87).

￿Table A-2: lists save-and-exit settings (refer to page 87).

Table A-3: provides the following information (refer to page 88):

Note: For explanations of some general programming parameters, refer to page 66. For explanations of serial parameters, refer to page 68.

Code Parameter : is the “human” name for programming options.

ID # : is the “portable” name for programming options. For example, to set a Code 39 minimum label length, enter 01 when programming the portable. Programming ID numbers given in this appendix can be used with all programming methods.

Type : tells what kind of setting to use for each code parameter:

On/Off : is a toggle. 1 turns the parameter on, and 0 turns it off.

Value : requires a two-character entry (e.g., 02 for two beeps after each good read, or 05 for a length of five).

String : uses one or more ASCII characters, followed by // to indicate the end of the string.

Immediate : takes effect as soon as the ID number is entered.

Acceptable Input : gives the settings or range of settings that you can use for each code parameter.

86 PT2000™ & TopGun™