Q-Logic 6200 SERIES Figure 4-23. Logging In with Mapped LUNs

4–Configuration

Controlling per-Host LUN Access on the iSR6200

4-28 ISR651101-00 J

Figure 4-23 uses color coding to identify the LUN mapping that became available

after the host logs into the presented targets.

Figure 4-23. Logging In with Mapped LUNs

If you plan to allow all iSCSI hosts unrestricted access to all discovered Fibre

Channel LUNs, you can completely disable LUN mapping using either SANsurfer

Router Manager or CLI commands.

Host accessible LUNs

Storage Array

21:00:00:c0:dd:13:16:f8

21:01:00:c0:dd:13:16:f8

21:02:00:c0:dd:13:16:f8

21:00:00:c0:dd:13:16:f8

21:00:00:c0:dd:13:16:f9

iSR6200

Blade 1

FC1

FC2

Host Entities

Host Entity 0

21:01:00:c0:dd:13:16:f8

21:01:00:c0:dd:13:16:f9

Host Entity 1

21:02:00:c0:dd:13:16:f8

21:02:00:c0:dd:13:16:f9

Host Entity 2

21:00:00:c0:dd:13:16:f9

21:01:00:c0:dd:13:16:f9

21:02:00:c0:dd:13:16:f9

LUN 1

LUN 2

LUN 3

LUN 4

LUN 5

LUN 6

iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970

iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970

iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970

LUN 1

LUN 3

LUN 4

LUN 5

Log-In

Contents

Main Document Revision History Table of Contents Preface 1 Introduction 2 Planning 3 Installation 4 Configuration 5 Fibre Channel over IP 6 Diagnostics and Troubleshooting 7 Removal and Replacement A Technical Specifications B Simple Network Management Protocol C Log Messages Glossary Index List of Figures Page List of Tables Preface Intended Audience Whats in This Guide Related Materials Documentation Conventions Page Communications Statements Federal Communications Commission (FCC) Class A Statement Canadian Department of Communications Class A Compliance Statement Avis de conformit aux normes du ministre des Communications du Canada CE Statement VCCI Class A Statement BSMI Class A Statement Laser Safety Information Page Technical Support Downloading Updates Training Contact Information Knowledge Database 1 Router Capabilities and Features Licensed Features Data Migration Remote SAN Island Connectivity Figure 1-1. Remote SAN Island Connectivity iSR6200 Router Chassis Figure 1-2. iSR6200 Router Figure 1-3. iSR6200 Router ChassisFront and Back Plates Power and Cooling Module (PCM) Figure 1-4. PCMBack Plate Figure 1-5. PCMFront iSR6200 Router Blades Table 1-1. Internal Temperature Sensor Limits iSR6200 Router Family Models iSR6260 Router Blade Figure 1-6. Fibre Channel Ports on the iSR6260 Router Blade iSR6250 Router Blade Figure 1-7. 10GbE Ports on the iSR6250 Router Blade Table 1-2. 10GbE Port LED Scheme iSR6240 Router Blade Figure 1-8. iSCSI (GE) Ports on the iSR6240 Router Blade Router Blade LEDs Figure 1-9. Router Blade LEDs Heartbeat LED (Green) System Fault LED (Amber) Input Power LED (Green) Beacon Indicator (Blue) Table 1-3. System Fault LED Blink Patterns Maintenance Button Figure 1-10. Router Blade Controls Reset a Router Blade Reset and Select Boot Image Reset IP Address Enable DHCP Restore Factory Defaults Fibre Channel Port LEDs Figure 1-11. Fibre Channel LEDs Table 1-4. Port LEDs Fibre Channel Transceivers Table 1-4. Port LEDs (Continued) Gigabit Ethernet Port LEDs Figure 1-12. Gigabit Ethernet Ports Ethernet PortManagement Figure 1-13. Ethernet Management Port Serial Port Figure 1-14. Serial Port 2 Devices Device Access Fibre Channel iSCSI Fibre Channel Switches Required for VPGroups Fibre Channel Performance iSCSI Performance Distance Bandwidth Latency Performance Tuning Table 2-1. T11.554Mbps Table 2-2. T345Mbps Round-Trip Delay (ms) TCP Window Size (kbytes) Table 2-3. OC-151Mbps Round-Trip Delay (ms) TCP Window Size (kbytes) Table 2-4. OC-3156Mbps Round-Trip Delay (ms) TCP Window Size (bytes) Table 2-5. OC-12621Mbps Round-Trip Delay (ms) TCP Window Size (bytes) Topology Figure 2-1. WAN TopologyRemote SAN Interconnect High Availability Management Recovery Services Security Page 3 Site Requirements Management Workstation Table 3-1. Management Workstation Requirements Power Requirements Installing the iSR6200 Router Table 3-1. Management Workstation Requirements (Continued) Pre-installation Check List Table 3-2. Worksheet for Router Blade 1 (left) Parameters Table 3-3. Worksheet for Router Blade 2 (right) Parameters Table 3-2. Worksheet for Router Blade 1 (left) Parameters (Continued) Mounting the Router Table 3-3. Worksheet for Router Blade 2 (right) Parameters (Continued) Installing the Transceivers Connecting the Router to AC Power Page Figure 3-1. iSR6200 Router ChassisFront and Back Plates Figure 3-2. iSR6200 Blade Ports and LEDs Connecting the Management Workstation to the Router Configuring the Management Workstation Setting the Workstation IP Address Configuring the Workstation Serial Port Installing SANsurfer Router Manager Downloading the SANsurfer Router Manager Installer Page Windows Installation Linux Installation Mac OS X Installation Starting SANsurfer Router Manager Configuring the Router Connecting Cable Devices to the Router Installing New Firmware Using SANsurfer Router Manager to Install Firmware Using the CLI to Install Firmware Page Page 4 Enabling Virtual Port Groups Figure 4-1. SANsurfer Router Manager VPGroup Page Page Page The following example shows the information grouped by physical Fibre Channel port. Figure 4-4. FC Port Information Page ISR651101-00 J 4-9 Zoning Virtual Port Groups on the SAN Figure 4-5. Single Blade, Single Fibre Channel Switch iSR6200 FC Target Array 4-10 ISR651101-00 J iSR6200 Figure 4-6. Single Blade, Dual Fibre Channel Switch FC Target Array SAN B ISR651101-00 J 4-11 Blade 2 Figure 4-7. High-Availability, Dual Blades, Dual Fibre Channel Switches iSR6200 FC Target Array SAN B Configuring Fibre Channel Array Hosts and LUN Assignments Figure 4-8. Correctly Configured Storage Array Using Virtual Port Groups Page Page Figure 4-12. Correctly Assigning LUNs to Your VPG Host Entities Figure 4-13. Incorrectly Presenting LUN 3 Connecting iSCSI Hosts to the iSR6200 Page Page Page Page Connecting iSCSI Hosts to the iSR6200 ISR651101-00 J 4-21 LAN Alias <MAPS TO> WWNN 10:00:00:20:c2:07:59:70 WWPN 21:04:00:20:c2:07:59:70 Figure 4-15. Host Access to LUNs on Storage Array SAN 4-22 ISR651101-00 J LAN iSCSI Host Controlling per-Host LUN Access on the iSR6200 iSR6200 Storage Array Blade 1 LUN 1 LUN 2 LUN 3 LUN 4 Figure 4-18. Logging into Target Before LUN Mapping Log-In The following example shows how to map the LUN targets with initiators using CLI commands. ISR651101-00 J 4-25 Figure 4-19. Logging into Target After Mapping LUN 1 Log-In LUN 1 Page Figure 4-22. Target Presentation/LUN Mapping WizardLUN Masking Configuration Status 4-28 ISR651101-00 J Log-In Figure 4-23. Logging In with Mapped LUNs LUN 1 LUN 3 LUN 4 LUN 5 Page Page ISR651101-00 J 4-31 Figure 4-25 shows host LUN access with LUN Mapping disabled. Figure 4-25. Host LUN Access with LUN Masking Disabled The iSR6200 router can access LUNs only after the host logs into iSR6200 presented iSCSI target(s). LUN 1 LUN 3 LUN 2 LUN 4 LUN 5 LUN 6 Page 5 FCIP Attributes Configuring FCIP Table 5-1. FCIP Preconfiguration Information Configuring an FCIP Route Using the CLI Page E_Port Extension Page Figure 5-2. E_Port Extension, Dual ISLs F_Port Extension Figure 5-3. F_Port Extension, Remote Storage Figure 5-4. F_Port Extension, Server Determining WAN Characteristics Round-Trip Time Link Data Rate Link Quality Table 5-2. WAN Data Rates Page Page Firewall Table 5-3. Ports Requiring Unblocking Data Compression Bandwidth Limiting TCP Window Settings Table 5-4. T1 / DS-11.554Mbps Table 5-5. T3 / DS-345Mbps Table 5-6. DS-5400Mbps Table 5-7. OC-150Mbps Table 5-8. OC-3150Mbps Table 5-9. OC-3150Mbps Table 5-10. OC-12 and Above621Mbps Table 5-11. OC-24 and Above1.244Gbps Router TCP Window Setup Table 5-12. Router TCP Window Settings 6 Troubleshooting Chassis Diagnostics Figure 6-1. Router Blade Diagnostic LEDs Input Power LED is Off Power-On Self-Test Diagnostics LED Blink Patterns Heartbeat Blink Pattern System Error Blink Pattern Management Port IP Address Conflict Blink Pattern Table 6-1. System Fault LED Blink Patterns Over-Temperature Blink Pattern Recovering a Router 7 SFP Transceivers iSR6200 Chassis Blades Dual-Blade Installation Removing the Failed Blade Figure 7-1. iSR6200 Router Blade with Cables Disconnected Page Figure 7-4. Inserting the New Blade into the Chassis Slot Single-Blade Installation Removing the Failed Blade Page Page (2) Page Power and Cooling Modules Removing the Failed PCM Figure 7-9. Back Side of Two PCMs with Fault (left) and Good (right) Status Indicators Figure 7-10. Removing the Failed PCM Installing the Replacement PCM Figure 7-11. Unlatching Lever on New PCM Figure 7-12. Inserting the Replacement PCM Figure 7-13. Back Side of Two PCMs, Both With Good Status Indicators Page A Interface Specifications Expansion Configurations Performance Features iSCSI Initiator Support Device Management Mechanical High Availability Protocols Environmental and Safety Page Page B Management Protocol SNMP Parameters Table B-1. SNMP Parameters Parameter Description SNMP Trap Configuration Management Information Base (MIB) Table B-2. SNMP Trap Configuration Parameters Network Port Table Page Page FC Port Table Page Initiator Object Table Page Page LUN Table Page VP Group Table Page Sensor Table Page Notifications System Information Objects Page Notification Objects Agent Startup Notification Agent Shutdown Notification Network Port Down Notification FC Port Down Notification Target Device Discovery Target Presentation (Mapping) VP Group Notification Sensor Notification Page Generic Notification C Table C-1. iSR6200 Router Log Messages Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Table C-1. iSR6200 Router Log Messages (Continued) Page Page Glossary Page Page Page Page Page Page Page Page Page Index A B C D E F G H I K L M N O P Q R S T U V W Z