Q-Logic FC0054607-00 A manual Configuring the Driver Parameters, To configure driver parameters

3–Configuration Configuring the Driver Parameters

Figure 3-3 Verifying That the Driver is Loaded

Configuring the Driver Parameters

Use the esxcfg-modulecommand to configure the QLogic Fibre Channel and Converged Network Adapter driver parameters.

To configure driver parameters:

1.To list the driver parameters, execute the following command:

#esxcfg-module -g qla2xxx

2.To set the driver parameters, execute the following command:

#esxcfg-module -s <options> qla2xxx

FC0054607-00 A 3-7