B–Log Messages
ISR645610-00 B B-17
74800 #%d: QLSetTargetData: No more room in
Target Database.
iSCSI Error Driver’s target database is full. Use the CLI or GUI to
remove unwanted/unused iSCSI targets.
75008 #%d: ql_process_error: OB_TCP_IOCB_RSP_W
returned DdbInx 0x%x pTpb %p
iSCSI Error A TCP retry for a frame failed on the connection
ddbIndex. Tpb contains the frame memory address.
86347 #%d: QLDisable: Restart RISC iSCSI Info Restart iSCSI processor (RISC).
86349 #%d: QLEnable: Restart RISC to update
EEPROM
iSCSI Info EEPROM updated, restart iSCSI processor (RISC).
86874 #%d: QLIsrDecodeMailbox: Link up iSCSI Info Link up reported by iSCSI processor for GE1 or GE2.
87346 #%d: QLGetFwStateCallback: link 100Mb FDX iSCSI Info iSCSI controller report ed a link speed/configuration
of 100Mb full-duplex (FDX).
87348 #%d: QLGetFwStateCallback: link 1000Mb
FDX
iSCSI Info iSCSI controller reported a link speed/configuration
of 1000Mb FDX.
87350 #%d: QLGetFwStateCallback: Invalid link
speed 0x%x
iSCSI Info iSCSI controller reported an invalid link speed.
102419 #%d: qlutm_init: Diagnostic failed, port 1
invalid SRAM
FC Fatal FC1 processor SRAM test failed.
102420 #%d: qlutm_init: Diagnostic failed, port 1
POST failed
FC Fatal FC1 processor power-on self-test (POST) failed.
102421 #%d: qlutm_init: Diagnostic failed, port 2
invalid SRAM
FC Fatal FC2 processor SRAM test failed.
102422 #%d: qlutm_init: Diagnostic failed, port 2
POST failed
FC Fatal FC2 processor POST failed.
Table B-1. iSR6152 Router Log Messages (Continued)
ID Log Message Module
Type
Msg.
Type Description