Q-Logic ISR6152 - page 50

3–Viewing Router Information

Router iSR6152

3-4 ISR645610-00 B

Fibre Channel Port Count identifies the quantity of Fibre Channel ports on

the router.

Temp erat ure shows the router’s current temperature in degrees

Centigrade.

System Uptime indicates the number of days, hours, minutes, and seconds

that this router has been up since booting after the last shutdown or reboot.

System Settings provides the following options:

System Log Level specifies the level of logging as either 0, 1, or 2

(levels 1 and 2 will adversely impact performance).

SSH Enabled. Select Enabled or Disabled to allow or deny access to

the router through SecureSHell (SSH).

Telnet Enabled. Select Enabled or Disabled to allow or deny access

to the router through Telnet.

FTP Enabled. Select Enabled or Disabled to allow or deny access to

the router through FTP.

Target - LUN Settings provides the following options:

Target Access Control. Select Disabled (the default setting) to

present all targets to all initiators. Or, select Enabled to obtain more

control over which iSCSI targets are presented to which initiators.

Target access control allows you to restrict access to iSCSI targets

from initiators, per router. When enabled, the targets are presented to

an initiator only if one or more LUNs are presented to that initiator from

that target. When Target Access Control is enabled, the target is

presented to an initiator if one or more LUNs are mapped to that

initiator from any VP group. That is, the host “sees” all VP groups,

even if the LUNs are presented only from one of the VP groups from

that target.

Target Presentation Mode. Use this setting to specify whether the

Fibre Channel targets are automatically or manually presented into the

iSCSI SAN. Select Auto (the default and recommended setting) to

have the Fibre Channel target automatically presented into the iSCSI

SAN. Or, select Manual to manually present the Fibre Channel targets

into the iSCSI SAN using the Target Map Wizard or the CLI

targetmap add command.

LUN Mapping. Select Enabled or Disabled to allow or disallow

access to a LUN.

Contents

Main Document Revision History Table of Contents Preface 1 Getting Started 2 Understanding the User Interface 3 Viewing Router Information 4 Viewing Service Information A Simple Network Management Protocol (SNMP) B Log Messages Index List of Figures List of Tables Preface Intended Audience Whats in this Guide Whats in the Help System Related Materials Documentation Conventions Page Figure i. Example: Jagged Edges Depict Partial Interface License Agreements Technical Support Training Contact Information Knowledge Database 1 System Requirements Connecting the Management Workstation to the Router Connecting the Hardware Setting the Workstation IP Address Configuring the Router Ports Updating the Firmware Starting SANsurfer Router Manager Starting SANsurfer Router Manager on Windows Starting SANsurfer Router Manager on Linux or Solaris Starting SANsurfer Router Manager on Macintosh Connecting SANsurfer Router Manager to the Router Figure 1-1. Connect to Router Dialog Box Getting Help Viewing the Help System Specifying the Help Browser Figure 1-2. Browser Location Dialog Box Viewing SANsurfer Router Manager Information Figure 1-3. About SANsurfer Router Manager Box Setting Security Figure 1-4. Setting System Security Refreshing the Host Configuration Figure 1-5. Refresh Dialog Box Exiting SANsurfer Router Manager Page 2 Main Window Figure 2-1. SANsurfer Router Manager Interface Menu Bar File Menu Table 2-1. Interface Description View Menu Settings Menu Wizards Menu Page Help Menu Toolbar Shortcut Menus Table 2-2. Toolbar Buttons Page Table 2-3. Shortcut Menu Options Table 2-3. Shortcut Menu Options (Continued) Option Description Tree Pane Router Tree Table 2-3. Shortcut Menu Options (Continued) Figure 2-3. Router Tree Pane (Example) Figure 2-4. Component Information Pane (Example) Services Tree Figure 2-5. Services Tree Pane (Example) Status Icons and Text Router Tree Icons Router FC and iSCSI Ports VP Groups Discovered FC and iSCSI Initiators FC and iSCSI Discovered Targets iSCSI Presented Targets FCIP Routes Arrays Services Tree Icons Page Page 3 Router iSR6152 Basic Information Figure 3-1. Router Information: Basic Information Page Page Page Management Information Figure 3-2. Router Information: Management Information Page Page NTP Server Information Figure 3-3. Router Information: NTP Server Information Page Security Figure 3-4. Router Information: Security Page SNMP Management Figure 3-5. SNMP Management Page SNMP Configuration Enabled SNMP Trap Receivers Features Figure 3-6. Features Page FC Ports Figure 3-7. FC Port: Information Page Advanced Configuration Figure 3-8. FC Port: Advanced Configuration Page Page Figure 3-10. FC Port: Performance Page iSCSI Ports Figure 3-11. iSCSI Port: Information Page iSCSI Port Information iSCSI Port Network Settings iSNS Advanced Configuration Figure 3-12. iSCSI Port: Advanced Configuration Page Page Page VP Groups Discovered FC Initiators Figure 3-15. Discovered FC Initiators: Information Page LUN List Figure 3-16. Discovered FC Initiators: LUN List Page Discovered iSCSI Initiators Figure 3-17. Discovered iSCSI Initiators: Information Page LUN List Figure 3-18. Discovered iSCSI Initiator: LUN List Page FC Discovered Targets FC Presented Targets Figure 3-19. FC Discovered Targets: FC Presented Targets Page iSCSI Presented Target List Figure 3-20. FC Discovered Targets: iSCSI Presented Target List Page Figure 3-21. FC Discovered Targets: Information Page iSCSI Presented Target Figure 3-22. FC Discovered Targets: iSCSI Presented Target Page Discovered LUN Information Figure 3-23. FC Discovered Targets: Discovered LUN Information Page iSCSI Discovered Targets Figure 3-24. iSCSI Discovered Targets: Information Page Page Arrays Figure 3-25. Arrays: Information Page iSCSI Presented Targets Figure 3-26. iSCSI Presented Targets: Information Page FCIP Routes Page Page Page Page Page Page Page 4 Information Router iSR6152 Data Migration Info Figure 4-1. Data Migration Info Page Data Migration Jobs Active Data Migration Jobs Figure 4-2. Data Migration Jobs: Active Data Migration Jobs Page Synchronizing Jobs Figure 4-3. Data Migration Jobs: Synchronizing Jobs Page Completed Data Migration Jobs Figure 4-4. Data Migration Jobs: Completed Data Migration Jobs Page Page Page A Management Protocol (SNMP) Introduction SNMP Properties Table A-1. SNMP Properties Management Information Base (MIB) Table A-2. SNMP Trap Configuration Parameters Table A-1. SNMP Properties (Continued) System Information Network Port Table Page Fibre Channel Port Table Page Sensor Table Page Page Notifications Notification Objects Agent Start Up Notification Agent Shut Down Notification Network Port Down Notification Fibre Channel Port Down Notification Sensor Notification Generic Notification Page B Table B-1. iSR6152 Router Log Messages Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Glossary Page Page Page Page Page Page Page Page Page Index A B C D E F G H I Page J L M N O P R S T U V W X