B–Log Messages
B-20 ISR645610-00 B
106813 #%d: QLIsrEventHandler: Unexpected async
event (%x), MB1=%x, MB2=%x, MB3=%x,
MB4=%x, MB5=%x, MB6=%x, MB7=%x
FC Error Fibre Channel processor reported an unexpected
asynchronous event. The mailbox registers provide
status, event code, and data related to the event.
106847 #%d: QLProcessResponseQueue: Invalid
EntryStatus %x, type %x
FC Error Fibre Channel controller reported an invalid Entry
Status %x, type %x.
106851 #%d: QLTimer: Heartbeat failed FC Error Fibre Channel controller failed to provide a heartbeat.
106853 #%d: QLTimer: Link error count (0x%x)
exceeded, link down
FC Error Driver has determined that the Fibre Channel link is
unreliable and unusable due to the number of errors
encountered. The link has been taken down.
106912 #%d: QLReserveLoopId: out of loop Ids FC Error Fibre Channel processor was unable to obtain the
number of loop IDs required. This failure occurs only
when the Fibre Channel processor is running multi-ID
firmware.
106928 #%d: QLMarkDeviceOffline: Device Id: %x
marked offline, cLinkDownTimeout = %x,
cPortDownRetryCount=%x
FC Error Driver was unable to re-establish connection to the
target within the timeout and retry counts, and is
therefore marking it offline.
106948 #%d: QLSnsGetAllNext: Name server login
FAILED %x
FC Error Fibre Channel processor is unable to log into the
Fibre Channel fabric name server.
107029 #%d: QLUpdateDeviceData: out of slots in
host database
FC Error Driver’s host (initiator) database is full.
107030 #%d: QLUpdateDeviceData: out of slots in
target database
FC Error Driver’s target database is full.
Table B-1. iSR6152 Router Log Messages (Continued)
ID Log Message Module
Type
Msg.
Type Description