Quadra-Fire QF130 MATELOG PINS WITH LOG SLOTS FLAT SPOT FOR LOG #6, Log Slots, Log #4, Log #5

LOG SLOT

5

MATELOG

PINS WITH

LOG SLOTS

FLAT SPOT

FOR LOG #6

Figure 11. Log #4 Figure 12. Place Log #5

Log #5 (SRV2225-710): Position Log #5 as shown in Figure 12. Mate the middle and left log pins with the two slots located on the bottom of the log. See Figure 13 for locations of log slots. The smaller end should be pointed toward the right side of the fi rebox.

LOG SLOTS

6

LOG RESTS

ON FLAT SPOTS

Figure 13. Log #5 Figure 14. Place Log #6

Log #6 (SRV2225-706): Rest the wide end of the log on the fl at spot of Log #5 as shown in Figure 12 and Figure 14. Place the narrow end on the fl at spot of Log #2. Flat spot on Log #2 is indicated in Figure 7.

LOG RESTS

ON FLAT SPOT

7

LOG GROOVE

MATES WITH

GRATE BAR

Figure 15. Place Log #7

Log #7 SRV2225-704): Note the location of the groove on the underside of the log. Place the opposite end on the fl at spot on Log #3. See Figure 9. Mate the groove on the underside of the log with the grate bar as shown in Figure 15, centered between the andirons.

	2225-935B
Quadra-Fire • QFI30, QFI35 • 2227-900 Rev. H • 1/11	35