Quadra-Fire QF130 Slot, Log End Rests On Flat Spot, Contacts, Grate Bar, Mate Notch With Gratebar

Log #4 (SRV2227-705): Mate the slot on the bottom of the log, shown in Figure 12, with the log pin located on the burner surface. The notch on the right end of the log should mate with the grate bar. See Figure 11.

SLOT

Figure 12. Log #4

LOG END

RESTS ON

FLAT SPOT

5

LOG END

CONTACTS

GRATE BAR

Figure 13. Log #5

Log #5 (SRV2227-706): Place the left end of the log on the fl at spot of log as shown in Figure 6. The right end of log should rest on the burner and touches the grate bar as shown in Figure 13.

6

MATE

NOTCH WITH

GRATE BAR

Figure 14. Place Log #6

LOG GROOVES

Log #6 (SRV2227-704): Rest the left end of Log #6 on the burner. Mate the notch on the left end of log with the grate bar. The log should rest on both log grooves as illustrated in Figure 9 and Figure 10.

2227-935

32 Quadra-Fire • QFI30, QFI35 • 2227-900 Rev. H • 1/11