6 Gas Information

A. Fuel Conversions

Before making gas connections ensure that the appliance being installed is compatible with the available gas type.

Any natural or propane gas conversions necessary to meet the appliance and locality needs must be made by a quali- fied technician using Hearth & Home Technologies specified and approved parts.

1. Converting to LP Gas

NOTE: Gas conversions should only be performed by a qualified service person, and/or where required by state and local codes, licensed installer/service technician. In the Commonwealth of Massachusetts, installation must be performed by a licensed plumber or gas fitter.

Kit Contents: Replacement orifice; replacement pilot injector; valve regulator; conversion label.

Tools Required: #2 Phillips screwdriver, slotted screwdriver or Torx TH20, 5/32 Allen wrench, 3/32 Allen wrench and 5/8 in. open end wrench.

Remove 2 Screws

Figure 6.1 Remove cast front, glass, and logs. Remove the two side bricks. Using a #2 Phillips Head screwdriver, remove the two screws, one on each side of burner. Retain fasteners for re-installation. Lift burner up and out of the fire- box.

Pilot Hood

Millivolt Generator

Thermocouple

Alignment Notch

NOTE: Do not remove the retaining clip from the hood.

5/32 Allen Wrench

Pilot Injector

Figure 6.3 Use a 5/32 Allen wrench to remove the pilot injec- tor. Replace pilot injector with the one supplied with the appliance (#35 for Propane, #62 for Natural Gas). There is an alignment notch on the pilot hood. Replace the pilot hood, snapping into position.

5/8 Wrench

Orifice

Figure 6.4 Remove the main burner orifice using a 5/8 in. wrench. Replace orifice with the proper size as indicated for your gas type and venting.

Installation

Propane (LP)

Natural Gas

Top Vent

.063

.106

Rear Vent

.059

.098

Re-install burner by placing it into the firebox. Secure in place with the two screws previously removed. DO NOT OVER TIGHTEN.

Re-install the two side bricks and attach with brick clips.

Re-install logs, glass and cast front.

Figure 6.2 Pull off the pilot hood and set it aside.

Quadra-Fire • Sapphire • 7055-116 Rev. D • 6/11

23

Page 23
Image 23
Quadra-Fire SAPPHIRE-D-CSB Gas Information, Fuel Conversions, Converting to LP Gas, Installation Propane LP Natural Gas

SAPPHIRE-D-CSB, SAPPHIRE-D-PMH, SAPPHIRE-MBK, SAPPHIRE-D-MBK specifications

The Quadra-Fire Sapphire series of fireplaces, which includes the Sapphire-D-PMH, Sapphire-D-CSB, Sapphire-D-MBK, and Sapphire-MBK models, epitomizes modern heating technology combined with elegant design. These units are meticulously engineered to enhance both efficiency and aesthetics, making them perfect additions to contemporary living spaces.

One of the standout features of the Sapphire series is its advanced combustion technology. The fireplaces utilize a patented Clean Burn technology. This innovation ensures that the combustion process is as efficient as possible, resulting in reduced emissions and maximizing heat output. With lower particulate emissions, these models not only provide warmth but do so in an environmentally conscious manner.

In terms of performance, the Sapphire fireplaces are designed to deliver consistent and radiant heat. With their powerful heating capabilities, they can warm up large areas, making them suitable for homes of various sizes. The efficient design helps to distribute heat evenly throughout a room, eliminating cold spots and ensuring comfort in all corners of your living space.

The design aesthetics of the Sapphire series is equally impressive. The models feature a sleek, modern design complemented by a large viewing area, allowing for an unobstructed view of the mesmerizing flames. The glass is designed to remain clean for longer periods, thanks to the sophisticated airflow management system that directs air over the glass surfaces, reducing soot buildup.

Customization options are another notable characteristic of the Sapphire series. Homeowners can choose from various finishes and styles to match their home’s decor. The units are available in both traditional and contemporary designs, allowing for versatility in different architectural settings.

The Sapphire-D-PMH model is equipped with a programmable thermostat for added convenience and efficiency. This technology allows users to set the desired temperature, ensuring that their space remains comfortable without unnecessary manual adjustments.

On the other hand, the Sapphire-D-CSB model features an innovative fuel management system that optimally uses wood fuel for extended burn times. This means less frequent refueling and more time spent enjoying the warmth and ambiance the fireplace provides.

The Sapphire-D-MBK and Sapphire-MBK models are designed with durability and longevity in mind. Each unit is constructed from high-quality materials that are built to withstand extreme temperatures while maintaining structural integrity over time.

In summary, the Quadra-Fire Sapphire series combines advanced technology, unique design, and high efficiency. With features like Clean Burn technology, customizable options, and smart fuel management systems, the Sapphire fireplaces offer not just heat, but a stylish centerpiece for modern homes.