G. Positioning the Logs
While still breakable, the logs do not become fragile until after the appliance is burned and they have cured. After curing, any handling must be done with care as breakage can easily occur.
PLEASE NOTE: Logs have been designed to work specifically with the burner of this appliance. Exact placement will ensure proper operation of your gas appliance and reduce sooting.
Place Log #3 over Locating Pins
Locating Pins
Figure 8.11 Position rear log (#3) over the two locating pins.
Depression for Log #1
Depression for Log #2
Figure 8.12 Shows the depression locations for Logs #1 and #2.
Place upright |
|
| |
1 | |||
in depression |
| ||
|
|
Figure 8.13 Place right front log (#1) into the depression. The log sits upright and does not lean against log #3.
3
21
Figure 8.14 Place left front log (#2) into the depression. The log sits upright and does not lean against log #3.
H. Mineral Wool
WARNING
Explosion Risk.
•Follow ember placement instructions in manual.
•Do NOT place embers directly over burner ports.
•Replace ember material annually.
Improperly placed embers interferes with proper burner operation.
Figure 8.15 Apply dime size pieces sparingly along front edge of burner. Do not block gas ports.
I. Embers
Place individual pieces of embers in front of and around the gas log where they can be seen. Space them so that gas can contact them on all sides. Try to avoid stacking the embers on top of each other. This will assure maximum brightness and efficient use of the catalyst promoting brighter, cleaner burning embers.
NOTE: Do not block gas ports.
31 |
