Figure 8.5 Install the vent pipe adapter with gasket or
E. Leg Leveling System
Figure 8.8 Thread Allen bolts through nuts until flush.
NOTE: Two Allen bolts and two nuts are included in the component bag. Normally, only one is required on the leg not touching the floor.
Figure 8.9 Slide assembled nuts and bolts into slots on legs with the nuts on the bottom.
Figure 8.6 Place the grille gently into the opening on top of the appliance.
D. Baffle Installation/Adjustment
BAFFLE
BAFFLE RETAINERS
Figure 8.10 Use a 5/32 in. 4mm) Allen wrench to adjust legs up and down to desired level.
F. Brick Installation
There are two side bricks. Place the brick in position. The top flange of the brick clip is positioned in a slot in the baffle bracket. The side brick fits behind the brick clip.
NOTE: The bricks need to be installed before placing the logs in the firebox.
Figure 8.7 Position baffle on top of baffle retainers on left and right sides. Centering baffle on retainers, ensure that the dark painted bevelled edge and darker painted baffle bottom side faces toward the front viewing area of the firebox. Bend the center tabs up to prevent the baffle from sliding out.
Baffle
Brick Clip
Brick - 2 on each side
This end goes in slot in baffle bracket
Brick Clip
Brick slips behind clip
30 |
