Step 12: Install Wireless Infrared Safety Sensors Wall Mounting Bracket (If Included)

Select a mounting position 5 inches above the floor to center line of wall bracket. The EMITTER and TRANSPONDER units must be mounted inside the door opening to minimize any interference by the sun; however, the sensors must be mounted against the door track. The brackets may be temporarily mounted to the wall (or jamb) with a #8 X1/2” screw provided and should be in contact with the door track. Leave this screw in place after installation is completed to prevent accidental rotation of beam sensor. It is very important that both wall brackets be mounted at the same height for proper alignment.

Using the 1/4” x 3/4” lag screw provided, attach the wall mounting bracket to the wall. In some installations it may be necessary to attach wooden spacers to the wall to achieve the required clearance. Expansion bolts (not supplied) may be required to attach brackets to walls constructed of materials other than wood or gypsum.

Step 13: Install Wireless Infrared Safety Sensor Bracket

Attach the sensor bracket to the wall bracket using the two #8 x 1-1/2” screws supplied (make sure that the curved hooks protruding from the bracket are positioned over and in firm contact with the door track).

Note: This opener is equipped with state-of-the-art wire- less infrared safety sensors which are activated by door movement. It is extremely important to position and mount the sensor brackets in firm contact with the door track so that the sensors are immediately activated by the door movement.

Step 14: Install Wireless Infrared Safety Sensor

Open hinged cover on infrared safety sensors and remove battery protective paper strip.

Observe proper battery polarity, as illustrated, in battery compartment.

Identify the TRANSPONDER (green LED) and mount this unit on the right side (from inside the garage looking to the outside) of the garage door and the EMITTER (red LED) on the left side. This same right/left mounting procedure must be fol- lowed on two and three door installations.

Mount the infrared safety sensors to the sensor bracket keeping the soft washer between the sensor and sen- sor bracket and then place the conical washer, lock washer and hex nut on the extender bolt, as illustrated.

Keeping the sensors pointing in towards door and aimed at each other, tighten nut until there is enough friction to hold in place. Do not fully tighten until the final alignment has been completed.

10

Page 9 Page 11
Page 10
Image 10
Quantum 3414, 3314, 3214, 3316 user manual Install Wireless Infrared Safety Sensor Bracket
Page 9 Page 11

3316, 3314, 3214, 3414 specifications

Quantum 3414, 3316, 3214, and 3314 represent a series of cutting-edge technologies that have emerged in the field of quantum computing and advanced materials science. Each of these models offers unique features and capabilities designed to push the boundaries of computational power and efficiency.

The Quantum 3414 is distinguished by its robust architecture and high-performance qubit system. It utilizes superconducting qubits, which provide exceptional coherence times and operational fidelity. This model is particularly well-suited for complex algorithm implementations, making it an attractive choice for researchers focused on quantum simulations and machine learning applications. Its innovative design integrates quantum error correction mechanisms that enhance reliability and reduce error rates.

Following closely, the Quantum 3316 emphasizes versatility and scalability. This model introduces a modular approach to quantum systems, enabling users to expand their computational resources as their needs grow. It features a hybrid quantum-classical architecture, allowing for greater flexibility in algorithm execution while leveraging classical computing's strengths. The 3316 is ideal for industries looking to optimize operational efficiency through quantum-enhanced processes.

The Quantum 3214 focuses on user accessibility and simplified integration into existing technological ecosystems. This model is equipped with an intuitive interface and user-friendly programming capabilities, catering to both seasoned quantum developers and newcomers. The 3214 also adopts cutting-edge quantum networking technologies, facilitating the remote connection of quantum systems for collaborative research and development.

Lastly, the Quantum 3314 combines power and compactness. Though smaller in form factor, this model does not compromise on performance. It employs advanced cryogenic technology to maintain optimal operating conditions for qubits, thus enhancing thermal stability and minimizing noise. The 3314 is particularly suitable for environments where space is limited yet high performance is essential, such as academic laboratories and research institutions.

Overall, the Quantum 3414, 3316, 3214, and 3314 each present a variety of sophisticated features tailored to specific applications within the quantum domain. From research and development to practical industrial applications, these models signify a significant leap forward in harnessing quantum technologies for future advancements. Their unique characteristics make them valuable tools for overcoming the challenges faced in the ever-evolving landscape of computing and science.
Top Page Image Contents