LTO-3A
Chapter 3 Using Your Tape Drive
Front Panel LEDs and Tape Eject
As shown in figure 4, the
The green POWER LED is on whenever power is applied to the drive.
The green ACTIVITY LED, the orange ERROR LED, and the amber STATUS LED are either on steady or blinking at different rates in various combinations to indicate the various drive conditions as shown in table 4.
Figure 4 LTO-3A Front Panel
Display
In table 4:
This indication . . . | Signifies that the LED is . . . |
|
|
On | illuminated continuously in a steady state. |
|
|
Slow | blinking on and off at a rate of one cycle per |
| second. |
|
|
Fast | blinking on and off at a rate of four cycles per |
| second. |
|
|
Quantum | 16 |
