Functional Specifications
Shock
Application
X,Y,Z axes
Sweep rate = 1.0 octave/ minute
Current and Power Requirements
The tape drive draws the highest current (and power) during the native write modes. Standby is measured with the tape loaded and tensioned or untensioned, and Idle is measured with power on with no tape loaded.
(The power drawn in these two modes is similar enough that they are listed together.)
Note: In table 13, the current and DC power values pertain to the internal tape drive, while the AC power values apply to the tabletop tape drive.
Table 13 Current
Requirements — SCSI
Interface
| 5 V Current (A) |
| 12 V Current (A) |
|
|
|
|
| |||||
| MaxPk1 |
|
| MaxPk1 |
|
|
| DC Power (W) | AC Power (W) | ||||
| MaxMean2 |
| MaxMean2 |
| Max4 |
| Max6 |
| |||||
Mode | Typ3 |
|
| Typ3 |
|
|
| Typ5 |
| Typ7 |
| ||
Standby/Idle | 2.5 |
| 2.5 | 2.5 | 0.7 |
| 0.7 |
| 0.7 | 2.5 | 2.5 | 2.5 | 0.7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Media Loading/ | 3.8 |
| 3.8 | 3.4 | 2.2 |
| 2.1 |
| 1.7 | 3.8 | 3.8 | 3.4 | 2.2 |
Unloading |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
600A Write – | 3.4 |
| 3.4 | 3.3 | 2.0 |
| 1.2 |
| 1.1 | 3.4 | 3.4 | 3.3 | 2.0 |
Motor Start8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
600A Write – | 3.7 |
| 3.7 | 3.5 | 2.0 |
| 1.1 |
| 1.1 | 3.7 | 3.7 | 3.5 | 2.0 |
Streaming |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quantum | 38 |
