plug the other end of the cord into a two- line phone jack or a coupler that is con- nected to two
4.Plug the other long cord into LINE 3&4 on the bottom of the telephone. Use a coin or screwdriver to fit the cord into the other groove beside the line jacks and plug the other end into the other
5.Leave the bracket detached and con- nect the AC adapter (see “Connecting the AC Adapter” on Page 12) and install the backup batteries (see “Installing the Backup Batteries”).
6.Attach the bracket with the narrow end of the wedge pointing down and slide the bracket up to lock it in place.
On a Wall Plate
1.Follow Steps
2.With the narrow end of the mounting bracket facing up, insert the bracket into the bottom mounting slots. Push the bracket up to lock it into place.
inches apart. Thread two screws into the wall, letting the heads extend about 1/8 inch.
1.Follow Steps
2.With the narrow end of the mounting bracket facing up, insert the bracket into the bottom mounting slots. Push the bracket up to lock it into place.
3.Align the bracket’s keyhole slots with the screws, then slide the base downward to secure it.
3.Align the bracket’s keyhole slots with the wall plate studs, then slide the base downward to secure it.
On a Wall
To mount the telephone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base. Drill two holes 315/16
INSTALLING THE BACKUP BATTERIES
Your system requires four AA batteries (not supplied) to provide backup power for a few hours if AC power fails. The backup batteries do not power all the system's features. For the best performance and longest life, we recommend RadioShack alkaline batteries.
If the power fails but the backup batteries are installed and have power, all data and sys- tem information is retained and network com- munication is restored.
Installation | 11 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
