Radio Shack AFX-300 owner manual Fm Page 32 Wednesday, August 18, 1999 951 AM

43-1245.fm Page 32 Wednesday, August 18, 1999 9:51 AM

Programming from a Remote Phone

1.Dial the phone number of the line connected to the AFX- 300.

2.Within 10 seconds after the TAD answers, or within 5 seconds after the AFX-300 answers, press 1, , then the 2-digit access code. The AFX-300 beeps once.

Notes:

•If the AFX-300 answers, the phone stops ringing and you might not hear any other sound.

•If you enter the access code incorrectly or do not enter it in time, the AFX-300 automatically disconnects the call. If this happens, hang up and start over again from Step 1.

3.Enter a remote command within 10 seconds by pressing

then the number(s) for the desired command. The AFX-300 beeps either two or three times, depending on the command you entered. See “Program Command Descriptions” on Page 33.

Note: If you enter the programming command incorrectly or do not enter it in time, the AFX-300 automatically dis- connects the call. If this happens, hang up and start over again from Step 1.

4.Hang up the phone.

Note: To program another feature, repeat these steps.

32