43-1245.fm Page 34 Wednesday, August 18, 1999 9:51 AM
Changing the Access Code
Touch-Tone Command: 
1, then any 2-digit number from 00-99
AFX-300 Response: 2 beeps
Default Setting: 99
For built-in security against accidental or unwanted changes to its settings, the AFX-300 requires you to enter a 2-digit ac- cess code each time you program it. The access code is pre- set to 99, but you can change the code to one you can easily remember.
Note: If you change the access code then forget it, you can re- set the AFX-300 to accept the default access code of 99. To do this, insert a small, pointed object (such as a straightened paper clip) into RESET on the bottom of the AFX-300 and press it gently.
RESET
34
