Message | Description/Action |
No formats | You cannot enter Data Entry mode until a |
available to print. | format is defined. |
Ribbon problem. | The ribbon cassette is depleted or jammed. |
| The ribbon may be broken. Check the ribbon |
| and reload or replace it if necessary. |
Stacker Fault. | The stacker is full or the stacker track is |
| jammed. Empty the stacker before trying to |
| print again. |
Supply problem. | There is a problem with the feed mechanism. |
| Reload the supply if necessary. |
| The 9474 will also display this |
| message if the backing paper takup reel is |
| full, the printer is out of stock, or the stock is |
| the incorrect size for the format that was |
| loaded. |
C o m m u n i c a t i o n E r r o r s
The following errors are caused by communication problems in the printer.
Message | Description/Action |
All comm | Software Error. Call Monarch Service. |
channels busy. |
|
Invalid comm | Software Error. Call Monarch Service. |
channel. |
|
Invalid file type. | Software Error. Call Monarch Service. |
Receive buffer full. The host did not stop transmission after it received an XOFF character or after DTR went inactive. Check communication setup at the host.
