Paxar 9474 manual Ivalue, Row, Col, Mag

	If the field does not change, define IFLAG as ‘I’ and set
	IVALUE to zero (0).
	NOTE: Do not select incrementing on fields that contain a
		check digit.
IVALUE	One to three digits to define the amount by which the value in
	the field increases or decreases as each ticket is printed. If
	the field does not change, define IFLAG as ‘I’ and set IVALUE
	to zero (0).
	Values:	0-999
	NOTE: The first number in the count sequence must contain
		the same number of digits as the highest number to
		be counted. For example, to count the numbers 1 to
		999, the first number in the sequence must be entered
		as 001.
ROW	One to four digits to define the row location of the field on the
	supply. This is the distance from the the guide edge zero
	point at the bottom of the supply and the bottom of the field.
	The zero point is 1.5 mm or 0.060 inches from the bottom of
	the supply. The bottom of the supply is the edge that exits the
	printer first.
	This value is measured in tenths of millimeters (TOMMS) and
	must be less than the maximum length of the supply.
	Values:	0-2032
COL	One to four digits to define the column location of the field on
	the supply. This is the distance from the guide edge zero
	point at the left edge of the supply and the left edge of the
	field.
	The zero point is 1.5 mm or 0.060 inches from the left edge of
	the supply.
	The unit of measurement is tenths of millimeters. The range
	must be less than the maximum width of the supply.
	Values:	0-1016(0 to 4 inches)
MAG	One to two digits as the magnification factor for the font of
	text fields.
	Values:	1 - 10

3-10 Message Structures