The printer does not require any hardware or software signals from the host system in order to operate.

Flow control characters can be changed

offline through the Printer Configuration mode.

The total number of formats, batches, and graphics is only limited by the amount of memory available.

S e t t i n g C o m m u n i c a t i o n Va l u e s

To set the communication parameters, follow the instructions below. For more information on operating the printer, refer to the Operator’s Handbook.

1.From the main menu, press d to display Printer Configuration. Press e . You’ll see

Enter password: _ _ _ _ _ _ _ _

Enter the 1-8 character password and press e .

When you first receive the printer, the password is MANAGER or ONLINE.

2.You’ll see the Configuration Options menu.

Select Config Option:

Define Check Digit Schemes

Press d until you see Host Port Configuration. Press e to select this option. With each parameter, you can enter a new selection, or just press e to keep the value that is displayed.

Communication Requirements 2-3

Page 11
Image 11
Paxar 9474 manual T t i n g C o m m u n i c a t i o n Va l u e s